SARKARI JOBS / LATEST JOBS

FDDI Recruitment 2026 – Apply Offline for 3 Junior Faculty, Lab Assistant Posts

Source-synced notice · Details shown below were extracted from the referenced publisher.

Last successful check: 4 Nov 2026. The information below comes from the named source; verify the authoritative notification before applying. A failed refresh never replaces previously saved details.

Update typeJob
Recruiting authorityFootwear Design & Development Institute (FDDI), Ankleshwar campus, Ministry of Commerce & Industry, Government of India
Last successful check4 Nov 2026
Last date12 Nov 2026
Reference sources

Notice information

  • Download Mobile APP
  • Updated November 02, 2026 05:18 PM
  • by Aarav Sharma Officially Verified

FDDI Ankleshwar Recruitment 2026 Overview

ParticularsDetails
OrganisationFootwear Design & Development Institute (FDDI), Ankleshwar campus, Ministry of Commerce & Industry, Government of India
Advertisement No.FDDI/ANK/HR/ADHOC/REQ/ 01, dated 02/11/2026
Department(s)School of Fashion Design; School of Footwear Design and Development
PostsJunior Faculty (Illustration & CAD); Lab Assistant (Pattern Making & Garment Construction); Junior Faculty (New Product Development)
Total Vacancies3 (tentative)
PayJunior Faculty: Rs. 50,000/- per month; Academic Support Cadre staff (e.g., Lab assistant): Rs. 30,000/- per month
Contract TermAd-hoc; initial tenure up to 6 months, may be extended for further periods of up to 06 months
Age LimitUpper age limit: Gen 35 yrs, OBC 38 yrs, SC/ST 40 yrs, PWD 45 yrs
SelectionInterview
Application ModeRegistered post/courier to Ankleshwar campus; can also be submitted by email
Job LocationAnkleshwar Campus, Gujarat
Last Date to Apply12-11-2026
  • The official notification does not specify the application fee.
  • Have a Question About This Job?
  • Ask doubts, report errors and get helpful replies.

Department-wise Vacancies

SchoolPostDomainNumber of Posts
School of Fashion DesignJunior FacultyIllustration & CAD1
School of Fashion DesignLab AssistantPattern Making & Garment Construction1
School of Footwear Design and DevelopmentJunior FacultyNew Product Development1
Total3
  • The notice lists 3 posts in total, one in each row of its vacancy table. The number of vacancies is tentative and may increase or decrease at the sole discretion of the management depending upon requirement at the time of recruitment.
  • The notice does not give a category-wise break-up of the posts. Candidates from SC/ST/OBC/EWS and differently abled categories can apply.

Qualification and Experience

PostQualificationExperience
Junior Faculty (Illustration & CAD), School of Fashion DesignEssential Qualification: Master's Degree (of min. 02 years' duration after Graduation) in Fashion Design/Graphic Design/Communication Design/Apparel Design/Knitwear Design/Leather Design/Textile Design/Fashion Technology/Fashion Design with min. 55% marks from a recognized university/Institute.Industry/Academic Experience of at least 3 years in the field of Illustration and CAD. Candidate should have hands-on experience on Corel, Photoshop, Tukacad and other fashion design related software.
Lab Assistant (Pattern Making & Garment Construction), School of Fashion DesignEssential Qualification: Essential 12th Pass, Desirable 10th Pass.Should be able to operate / sew garments and repair the sewing machine like lock stich, overlock and flatlock.
Junior Faculty (New Product Development), School of Footwear Design and DevelopmentEssential Qualification: 1. Bachelors/Masters Degree (2 years after graduation) and 1 year diploma in Footwear manufacturing/Footwear Design/Footwear Production with minimum 55% Marks. 2. Bachelors/Masters Degree (2 years after graduation) in Footwear Technology with specialization in Design with minimum 55% Marks.Academic and/or Industry Experience of at least 3 years in the field of Footwear Design. Academic experience, if any, should be of teaching in UG degree or higher academic courses.
  • The notice states that the qualification and experience of Junior Faculty and Academic Support Cadre shall apply as per the Recruitment Rules for the engagement against the respective positions. Merit, practical teaching ability, presentation and communication skills shall be given due importance. The post-wise requirements printed in the vacancy table are:
  • Desirable for Junior Faculty (New Product Development): knowledge of manual design and operating 2D and 3D Shoe Design software.

Upper Age Limit

CategoryUpper Age Limit
Gen35 yrs
OBC38 yrs
SC/ST40 yrs
PWD45 yrs
  • The same upper age limit is printed for all three posts. The notice does not print a date on which age is counted.
  • For the full eligibility of each post in its discipline, candidates should check the official notification and the Recruitment Rules it refers to.

How to Apply for FDDI Ankleshwar Recruitment 2026

  • Applications are made in the prescribed format annexed to the advertisement and must be submitted by 12 November 2026.
  • Fill in the application in the prescribed format annexed to the advertisement.
  • Attach a CV and self-attested copies of supporting documents regarding qualification, experience, age proof and other details.
  • Write the post applied for clearly at the top of the envelope.
  • Send the application by registered post/courier to: The Executive Director, Footwear Design and Development Institute, H-3301 NEAR ESIC HOSPITAL, GIDC, Ankleshwar, Gujarat 393002.
  • Alternatively, submit the application by email to [email protected].

Selection

  • The selection of candidates shall be through interview. Only shortlisted candidates will be invited for the interview. The notice does not give an interview date.

Documents Required

  • Application in the prescribed format
  • CV
  • Self-attested copies of qualification documents
  • Self-attested copies of experience documents
  • Self-attested age proof
  • Self-attested copies of other relevant details

Important Instructions

  • Incomplete applications and those not in proper format will not be considered.
  • The number of vacancies is tentative and may increase or decrease at the sole discretion of the management.
  • For any query, email [email protected].

Important Links

LinkDetails
FDDI Ankleshwar Recruitment 2026 Notification PDFAdvertisement No. FDDI/ANK/HR/ADHOC/REQ/ 01 dated 02/11/2026
FDDI Ankleshwar Application FormPrescribed application format
FDDI Official WebsiteFootwear Design & Development Institute

Q1. How many vacancies are there in FDDI Ankleshwar Recruitment 2026?

  • There are 3 tentative posts: Junior Faculty (Illustration & CAD), Lab Assistant (Pattern Making & Garment Construction) and Junior Faculty (New Product Development), one each.

Q3. What is the qualification for FDDI Junior Faculty (Illustration & CAD)?

  • A Master's Degree (of min. 02 years' duration after Graduation) in Fashion Design, Graphic Design, Communication Design, Apparel Design, Knitwear Design, Leather Design, Textile Design or Fashion Technology with min. 55% marks, plus at least 3 years of industry/academic experience in Illustration and CAD.

Q4. What is the qualification for the FDDI Lab Assistant post?

  • The Lab Assistant (Pattern Making & Garment Construction) post requires Essential 12th Pass, Desirable 10th Pass, and the ability to operate/sew garments and repair lock stich, overlock and flatlock sewing machines.

Q5. What is the age limit for FDDI Ankleshwar Recruitment 2026?

  • The upper age limit for all posts is 35 years for Gen, 38 years for OBC, 40 years for SC/ST and 45 years for PWD candidates.

Q6. What is the salary of FDDI Junior Faculty and Lab Assistant?

  • Junior Faculty get Rs. 50,000/- per month and Academic Support Cadre staff (e.g., Lab assistant) get Rs. 30,000/- per month as consolidated pay.

Q8. What is the selection process for FDDI Ankleshwar Recruitment 2026?

  • Selection is through interview, and only shortlisted candidates will be invited for it.
Resize photo for formCompress certificates
BEFORE YOU APPLY

Prepare your photo, signature and certificates here

Use AI Tapri to resize your application photo and signature to the required pixels and KB, compress certificate PDFs, and prepare uploads before opening the official application.

Read the official notification for qualifications, age limits, category relaxations, fees and important dates. Keep your photo, signature, education certificates and relevant identity documents ready according to that notification.

AI Tapri is not a government website. Complete official sign-in, payments and applications on the recruiting authority’s portal.

More latest jobs